PC Products 61411 Fast-N-Ez Translucent Self Mix Epoxy - 14 Ml

"PROTECTIVE COATING" SELF MIX EPOXY

PC-Fast-N EZ is an extremely flexible translucent paste epoxy. Ease of use is the key with this self mixing formulation. PC-Fast-N EZ flows beautifully through a static mix nozzle that mixes the epoxy thoroughly. The mixing nozzle doesn't just mix the product; it also helps with precise applications. PC-Fast-N EZ has a fast cure time, making jobs complete and easy as 1-2-3!
Bonds most everything to anything.
Note: PC-Super Epoxy will not bond to wax paper, Polyethylene, and some other plastics. There are hundreds of plastics in thousands of combination. Test a small area when in doubt.

Highlights:-

• Use as a general purpose adhesive to bond wood, metal, fiberglass, ceramics, glass and many hard plastics.
• Forms a water-resistant bond and is tough enough to be drilled, tapped, filled or sanded after final cure.
• Low-odor.
• 2-component.
• Cures rapidly at room temperature with exceptional tensile adhesion and peel strength to a wide variety of substrates.
• Forms a tough bond without the need for clamping.
• Flexible.
• Remove plastic cap from center of plunger (retain); snap off end of syringe (discard).
• Push plunger until epoxy dispenses evenly.
• Push and twist nozzle over opening locking nozzle into position. be sure the nozzle snaps into place past prongs. nozzle must be locked in place prior to using.
• Depress plunger evenly and slowly dispense mixed epoxy directly onto the surface.
• After you have finished using the syringe, remove the nozzle and discard.
• Wipe the syringe end after removing the nozzle. place plastic cap onto the end of syringe and store for future use.
• Apply pc-fast-n ez in any thickness to both sides of surface and bring together firmly. be careful to insure that ample pc-fast-n ez remains between the contact surfaces.
• Waterproof self mix epoxy.
• Size : 14 ml