Jewelry Spot Welder Machine, Portable Pulse Sparkle Spot Welder, 600W 80A Electric Spot Welder with Foot Pedal, Adjustable Permanent Jewelry Welder Kit for Soldering Jewelry Clasps

Description This spot welding machine features high-quality sheet metal housing, which is very durable. 600W power can realize spot welding in a shorter time. High-precision current regulations and tungsten needle welding head bring you professional, smooth, and solid welding. It is the best partner for family DIY and general maintenance work!SpecificationsMaterial: Sheet MetalColor: BlueModel: 80AWelder Type: Electric Spot WelderPower: 600WPlug: US StandardWelding Range: 0.5-1.5mm/0.02-0.06inInput Voltage: 110 VProduct Size: 25.5*24.8*13cm/10*9.8*5.1in Packing Size: 37*28*18cm/14.56*11.02*7.08inGross Weight: 4.9kg/10.8lbsPackage Included1 x Jewellery Spot Welding Machine1 x Power Cord1 x Foot Switch1 x Tungsten Needle1 x Fixture1 x Hand-held Welding Guns1 x Pedestal1 x English ManualOther Accessories for UseHow to Operate1. Connect the power cord.2. Install the hand-held welding gun/pedestal, fixture, foot switch, and tungsten needle in turn3. Turn on the power switch.4. Adjust the height of the tungsten needle(the welding head should extend about 1.96in.).5. Adjust the coarse tune knob and fine tune knob.6. Adjust welding distance.7. Hold the workpiece with the fixture.8. Step on the foot switch with your foot (move your foot away quickly), and the spot welding is completed.Notes1. Before using the welding machine, check whether the power supply meets the operating voltage. Connect the output wire of the welding machine to the screw of the corresponding polarity (tighten the nut when connecting the output wire to the output polarity).2. When working, clamp the workpiece with the fixture, close to the tungsten needle. Depending on the size and shape of the workpiece, generally, the distance between the tungsten needle and the workpiece is 0.007-0.04in. The discharge end of the tungsten needle must be sharp before and during use.3. Please do not put the welding machine in a damp place and keep it dry.4. Please don't step on the foot switch for a long time. Step on it and move away immediately. If the switch is pressed for a long time and the machine is in a short circuit state, the internal circuit will be burned.5. Strong light will be released during welding. Please wear protective glasses during welding and do not look directly at the welding part.6. When stepping on the foot switch, do not touch the metal part of the tungsten needle and the fixture at the same time, otherwise, there will be a feeling of acupuncture.7. Non-professional personnel are not allowed to disassemble and repair. There is a high voltage inside.8. Please note that only 0.5-1.5mm diameter can be welded. Too thick or too thin can not be welded.9. Please read the manual completely before installation and use, and pay particular attention to the safety instructions included. 10. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.

• [Easy to Use] One-button power switch, adjustment knob with clear scale, and identifiable interface allow you to use this spot welder easily.
• [Good Welding Effect] Using the principle of plasma high-frequency discharge, a high-temperature arc is generated between the workpiece and the tungsten needle to form a molten pool at the metal welding junction instantaneously, allowing for smooth, firm, fast, and efficient welding.
• [Two Operation Modes] According to the specific workpiece and your operating habits, a hand-held welding gun and a welding gun with a bracket are provided for your selection and replacement.
• [Easy to Carry] The jewelry welder is lightweight, compact, and has a carrying handle on the top, making it convenient for you to carry when you go out to work.
• [Wide Application] This jewelry spot welder can be used for the rapid welding of platinum, gold, K gold, silver, and steel. It is mainly used for welding the ring clasp of the jewelry. Workpieces such as metal plates and tubes cannot be welded.